Bushnell ImageView 11 0833 User Manual

Instruction  
Manual  
Model #: 110833  
Lit.#: 98-0917/08-10  
Version 2.0  
Review Display  
Pull up both sides of this  
end to raise the display  
LCD Display  
Resolution  
of the file  
View Button  
Display  
Button  
4-way Arrow  
Keypad+MENU  
Button  
File #  
4
5
6
JPG=photo file  
AVI=video file  
Diopter  
Adjustment  
(rotate eyepiece)  
7
8
Parts Guide  
3
2
1
Binocular  
Focus  
#
1
2
3
4
5
6
7
8
Display Icon Guide (Preview Mode)  
Battery Indicator (“full” battery shown)  
POWER  
Button  
SNAP  
Button  
# of Photos/Videos Left (based on remaining memory)  
Internal or SD card Memory (“Internal” shown)  
White Balance Setting (“Auto” shown)  
Remote  
Jack  
USB Port  
Exposure Meter Pattern (“Weighted” shown)  
Still Photo or Video Mode (Still Photo mode shown)  
Resolution Setting (in pixels)  
Quality/File Compression (Best / Better / Standard )  
Power LED  
Card Slot  
3
Quick Start Guide  
1.  
The camera is powered by two AAA batteries (not included). Slide the battery cover open (see arrow on  
cover) and insert batteries, using the polarity marks inside for reference. A battery indicator on the lower  
left corner of the display indicates remaining power.  
2.  
The camera has 16 MB of internal memory, so you can take photos anytime without using a card. To be  
able to take more photos without having to stop and download them frequently, you may use SD cards  
(not MMC cards) up to 32 GB capacity. Insert a new SD card ("upside down" with metal contacts facing  
up) in the slot. The card will click into place. Push the card in slightly to release and remove it. Turn off  
the camera’s power before inserting or removing a card. Cards that have been previously used in other  
devices should be formatted by the camera before taking photos (see “Review Mode”: Format)  
Pull the LCD display up to viewing position, by grasping the indented areas on each side. Briefly press  
the POWER button. The red power LED will turn on, and the LCD will display a “Bushnell” logo, then go  
to black (to conserve battery life). Press the Display button to turn the LCD back on. Pressing Display  
again will first turn off all screen icons, then turn the entire display off (camera power remains on). The  
entire camera will automatically turn off after one minute if it has been inactive (no buttons pressed).  
This can be changed, using theAuto Offoption in the camera’s menu. To turn the camera off manually,  
briefly press the POWER button. The default camera settings will provide optimum quality under most  
conditions, but you may want to set the date since it will be imprinted on photos by default (you can also  
turn it off using the menu options).  
To set the current date and time for imprinting, press MENU. Press the Down arrow key 7 times to  
highlight “CLOCK SET, then press MENU again. Now set the Year, Month, Date, Hour, and Minute, using  
the Up/Down arrow keys to make changes, and the Right key to move to the next field. Once the date  
& time have been set, press the MENU button again. Press the Down arrow key once to highlight “DATE  
STAMP, press MENU, then highlight your preference: Month/Day/Year orYear/Month/Day order, or select  
“OFF” if you don’t want to imprint the date on your photos. Press MENU to confirm your setting, then  
keep pressing the down arrow key to highlight “Exit. Press MENU again to return to the “live” preview  
3.  
4.  
4
display. Note: you may need to reset the date/time after changing batteries.  
5.  
To take a still photo, hold the camera steady with both hands and press the SNAP button. The camera  
focus is preset to take sharp photos from approximately 35 feet to “infinity. To shoot a video, press the  
right arrow key three times until the red movie camera icon appears at the top right corner of the display  
(see below). You can then start shooting the video at any time by pressing SNAP. To stop recording the  
video, press SNAP again. Note: if the power is turned off, then back on, the camera will return to still photo  
mode.  
6.  
7.  
When using a tripod, you can help avoid the effects of camera shake by plugging the supplied remote  
shutter release into the jack above the SD card slot, and using the button on the remote rather than  
SNAP to take photos.  
To review or playback a still photo or video, press the View button. You will see the most recent still  
photo or video (first frame). To review previous photos or videos one at a time, press the Left arrow key.  
The top left corner of the display will indicate “AVI” instead of “JPG” if the file is a video. The file number  
is shown on the lower left of the display, and the resolution (of still photos) or length in seconds (for  
videos) is shown on the right. To play back a video, press the SNAP button (press again to stop playback).  
To see “thumbnail” images of multiple stored photos/videos at once, press the Display button. Use the  
Left/Right arrow keys to select an individual file, then press Display again to see it full frame. To delete  
a photo or video, press MENU. “DELETE ONE” is the first option in the PLAY menu (only the currently  
displayed photo/video will be deleted-use “FORMAT” if you want to delete all files from memory). Press  
MENU again, then the Up arrow key to highlight OK. Press MENU to delete the photo or video, then press  
View to return to the review screen. Press View again to switch to the live preview screen when you are  
ready to take more photos or videos.  
Your ImageView is ready to use right away- it is not necessary to “go into the menu” before taking photos.  
However, your percentage of successful photos (especially under less than ideal conditions) will increase if  
you read the rest of this manual and understand how to use the available options and settings, as well as the  
section covering “Downloading the Photos & Videos to Your PC.  
5
Tripod  
Socket  
Loading Batteries  
Turn the ImageView over, and slide open the battery cover as indicated by  
the arrow, setting it aside. Insert 2 AAA Alkaline or Lithium batteries into the  
compartment in the direction indicated by the polarity marks inside, then  
replace the cover and slide it back into place until it clicks. Note: Rechargeable  
NiMh type batteries may also be used, but some may not deliver adequate  
current to power the ImageView. AAA NiMh batteries with a current rating of  
850 mAh or higher are recommended.  
Battery  
Compartment  
(Slide Open  
In Direction  
of Arrow)  
Using the Internal Memory and SD Cards  
The camera’s 16 MB internal memory can store from a minimum of only 3-4 (at 3264x2440 resolution and  
Best quality) up to hundreds of photos, depending on resolution and quality settings you choose in the  
main menu. A “countdown” indicator on the lower left of the display shows the remaining number of photos  
that the available memory can hold. When no more photos will fit in the available storage, a “Memory Full!”  
message appears. To expand the available storage, you may add an optional SD (Secure Digital) memory  
card, with up to 32GB capacity. MMC cards, which look similar to SD cards, are not recommended. The card is  
inserted into the slot on the back of the camera pod, with thenotchedcorner on the left as indicated by the  
card icon below the slot. Insert the SD card with the label side facing down. Note: be sure the power is turned  
off before inserting or removing cards to prevent possible loss of files or damage to the card. A new card will  
not require formatting, but a card that has been previously used in other devices (cameras, PDAs, etc) should  
be formatted by the ImageView before beginning to take photos or videos (see “Format” in the Review Mode  
section of this manual for details). Note that formatting will erase all files previously stored on the card,  
so be sure they have been downloaded or copied first if you wish to keep them.  
6
Basic Binocular and Camera Setup  
Before you begin using it, you’ll probably want to take a few moments to set up the ImageView for your  
individual eyesight and user preferences. Leave the rubber eyecups in their “up” position if you are not  
wearing glasses, or roll them down if you are. Grasp the left and right sides of the binocular, and pull them  
apart or push them together while looking through the binocular to adjust the eyepiece spacing until your  
view is a single circular image. Find a distant object with fine detail (tree, sign, brick wall, etc), and adjust the  
center focus knob until the object appears sharp when viewed through the left binocular eyepiece only. Then,  
looking at the same object through just the right side of the binocular, simply rotate the right eyepiece until  
the image is equally sharp for your right eye. This is called the diopter adjustment, and compensates for any  
difference in sight between your left and right eyes. Once set during this initial procedure, you can leave the  
diopter adjustment alone and just use the center focus knob to bring objects at any distance into sharp focus  
through the binoculars (the minimum focus distance is about 15 feet).  
Your digital photos and videos are not affected by the center focus knob, as the camera lens located  
between the binocular’s objective lenses does not require focusing. It is preset so that objects ranging from  
approximately 50 feet and farther away will be in focus. Note that the binocular is capable of focusing closer  
than the camera. Check the live preview image on the LCD display to make sure you are far enough away to  
ensure sharp photos. The camera lens provides 8x magnification, which is the same as the binocular’s optics,  
and is aligned so that and object centered in the binocular’s view will also be centered in your photos or  
videos. Therefore, it is not necessary to have the LCD turned on or even raised while you are shooting photos  
or videos. Reducing use of the LCD will extend battery life significantly. Pressing the Display button will turn  
the LCD screen off but leave the camera powered on, ready to take photos anytime you press SNAP.  
You may want to go into the camera’s main menu and set the correct date before using the camera for the first  
time, since the date stamp (imprint) feature is turned on by default (but can be defeated if you wish). Please  
refer to Step 4 under “Basic Setup” for details.  
7
Taking Still Photos  
After following the initial setup as described in the previous pages, you are ready to take a photo:  
1.  
2.  
Raise the LCD and press the POWER button briefly (red LED lights, Bushnell logo screen appears, then  
display goes black). Press the Display button to turn on the LCD again if you want to see a preview of the  
“liveimage or check menu settings, battery condition, etc via the display icons.  
The ImageView will default to high resolution and quality settings, as well as “everything on automatic”  
when it is turned on for the first time, so you can take excellent photos right away. If you prefer to use  
different settings, refer to the section “Using the Main Menu” for directions regarding how to find and  
change settings such as resolution and exposure and other options.  
3.  
4.  
5.  
You may compose your photo while looking through the binocular (the LCD does not need to be  
on to take a photo). However, for the most accurate framing, checking the LCD preview display is  
recommended.  
Be sure you are not closer than approximately 50 feet from your subject. The binocular optics will focus  
closer than this, but the camera focus is preset to take photos of distant subjects (no focusing is necessary  
for the camera). The LCD may be used to verify that the subject is not too close for sharp results.  
Hold the camera as steady as possible with both hands and slowly squeeze the SNAP button. The  
display will “freeze” briefly while the file is stored, then you are ready to take another photo. The 4-digit  
counter on the lower left will count down to indicate the number of remaining photos as you use up the  
available internal or card memory. Once the display indicates “Memory Full” when SNAP is pressed, you  
are out of memory (storage space) and should download any photos you wish to keep so they may be  
deleted, or you may remove the full card and install another SD card.  
6.  
Digital zoom up to 3x is available. Press the Down arrow key to zoom in (note the“Wide to Teleindicator  
bar at the bottom of the display). Press the Up arrow key to zoom back out. No digital zoom is used  
(optical magnification only) when the W>T zoom indicator bar goes out after you zoom all the way back  
to the left (“W”).  
8
7.  
Press the View button if you wish to check the photo after you take it, then press it again to return to a  
live preview.  
See the section “Review Mode” section for more detail about reviewing and deleting previously taken  
photos.  
Warning: Use care during handling to avoid touching the camera lens (located front center between the  
binocular lenses) to prevent degrading the image quality.  
Clean the camera lens only with dry lens tissue or microfiber cloth. DO NOT use liquids of any type.  
Selecting and Using the Video Mode  
1.  
2.  
Follow steps 1-4 on the previous page, “Taking Still Photos”  
To change from still photo to video mode, press the Right arrow key 3 times, until the movie camera icon  
is displayed at the top right area of the LCD. You are now in Video Mode. Press SNAP to start recording a  
new video clip, and press it again to stop recording and store the video in memory. The recording time  
is limited only by the amount of internal or card memory currently available. You may record a single  
long video until you run out of memory, or multiple shorter videos by stopping and starting recording  
whenever you wish by pressing SNAP. The counter on the right side of the display shows the elapsed  
time in seconds since the recording was started.  
3.  
Press the View button if you wish to check a video after you shoot it. Press the SNAP button to begin  
playback, press it again to stop playback. Press the Left arrow key to review your previous video or  
still photo files. Pressing the Display button will let you see a “thumbnail” review of multiple files-use  
the arrow keys to highlight the file you wish to review, then press Display again to select and view it.  
When you are ready to return to the live preview display to shoot more videos (or stills), press the View  
button.  
See the section “Review Modefor more detail about reviewing and deleting previously taken videos.  
9
Using The Main Menu-Options and Settings  
As mentioned earlier in this manual, your ImageView is already set for high resolution and quality right out  
of the box. Exposure, white balance, and other variables are set automatically. This means that you will get  
good results for most subjects and lighting without the need to go into the menus and change any settings.  
However, we recommend that you become familiar with the available options so that you can improve your  
photos if, for example, you decide they are coming out too dark (common for snow scenes with most cameras),  
or too green (under many fluorescent lights). Press the Menu button to enter the main menu. Use Down or  
Up arrow keys to highlight an option within the menu, then press MENU if you wish to change the settings  
for that option. Use the Left/Right arrow keys to select the setting you want, then press MENU to confirm this  
setting. The main menu contains a submenu, called “Resolution, with separate settings for still photo and  
video resolution. Select “Exit” after using the Resolution submenu to return to the main menu. Here are the  
options and settings available in the main menu (Default settings are shown in Bold).  
Option  
Settings  
Description  
Image Size  
(Resolution Submenu)  
3264x2440(8MP*), Sets the still photo resolution in pixels. Higher resolution  
2550x1920(5MP*), settings produce sharper/larger prints but require more  
storage space in internal or card memory. Use lower  
settings to store more in memory, or for email, PC viewing  
only, etc. (*resolution interpolated via internal software)  
2048x1536(3MP),  
1600x1200(2MP),  
800x600(0.5MP)  
Video Size  
(Resolution Submenu)  
640x480/30fps,  
640x480/15fps,  
320x240/30fps,  
320x240/15fps  
Sets the video resolution (pixels per frame and frame rate).  
Higher resolution/frame rate settings produce better/  
smoother videos but require more storage space in  
internal or card memory. Use lower settings to store more  
in memory.  
10  
Main Menu-Options and Settings  
Option  
Settings  
Description  
Image Quality  
Best, Better,  
Standard  
Sets the amount of file compression, which affects the  
quality of the photo and the size of the file it creates. This  
can be used independently of Image Size to help store  
more photos in exchange for slightly reduced quality.  
“Bestproduces the highest quality, but also generates  
larger files that fill available memory sooner (fewer photos  
possible).  
EV  
-2.0 ~ +2.0  
(Default= 0 EV)  
Provides manual under/over exposure adjustment in 0.5  
EV steps. Minus values produce darker photos, plus values  
lighter.  
White Balance  
Auto, Daylight,  
Cloudy,  
Fluorescent,  
Tungsten  
Sets the reference for neutral white, so that colors are  
reproduced correctly. If “Autodoes not provide good  
results, try the setting that matches the light source.  
Meter  
Weight, Center,  
Average  
Sets what area of the framed subject is used to determine  
exposure. “Weightbases the exposure 60% on the center  
of the frame, 40% on the rest of the frame., “Centeruses  
only the center area (good for strong backlit situations),  
and “Averagesets exposure based on an average of the  
overall scene light levels.  
11  
Main Menu-Options and Settings  
Option  
Settings  
Description  
Language  
English, Spanish,  
Italian, French,  
German  
Selects your preferred language for all menu display  
screens.  
Auto Off  
60 Seconds, 120  
Seconds, Cancel  
Sets the interval after the last action (pressing any button)  
before the camera turns off to conserve battery power.  
Select “Cancelto prevent auto shutoff altogether.  
Clock Set  
Date Stamp  
Use the Arrow keys to set (in order) the Year, Month, Date,  
(2nd row) Hour, and Minute. Press MENU when done. See  
“Date Stamp” also.  
MM/DD/YY, YY/  
MM/DD  
MM/DD/YY: Month/Date/Year are imprinted on each  
photo. YY/MM/DD: Year/Month/Date are imprinted. Off:  
no imprint is added to photos.  
Sound Effect  
Default Setup  
On, Off  
Turns the confirmation beep sound on or off  
OK, Cancel  
Select “OKand press the MENU button to restore all  
settings to their original factory defaults.  
EXIT  
Select “Exitand press MENU to exit the Main menu and  
return to the preview (“livecamera) display  
12  
Additional Features  
From the “livepreview display (not the main menu), press the Right arrow key to select/cycle through these  
additional camera features (a fourth press will return to the preview display again):  
Feature  
Icon  
Description  
Self Timer Clock (white)  
Photo is taken after a 10 second delay when the SNAP button is  
pressed. With the ImageView mounted on a tripod, this can help  
prevent blur caused by jarring the camera when SNAP is pressed.  
To take a photo at the exact time you wish and reduce camera  
shake, plug the included remote shutter release cable into the  
jack on the rear of the camera pod and press the button on the  
remote instead of SNAP on the camera.  
Sequence Multiple Frames (red)  
3 frames are taken in rapid sequence when SNAP is pressed.  
Normal  
Video  
Movie Camera (red)  
Camera shoots a video clip when SNAP is pressed, with  
maximum recording time limited only by the amount of available  
internal or card memory. The counter on the right side of the  
display shows elapsed minutes and seconds. Press SNAP again to  
stop recording.  
13  
Review Mode -Viewing and Deleting Photos Using the Review Menu  
Press View to enter Review mode. Use the Left arrow key to go back through the stored photos/videos. Press  
SNAP to playback a video (indicated by AVI at top left of display). Once you are in review mode, pressing the  
MENU button will enter the review menu. This operates in the same way previously described in the main  
menu section (use the Arrow keypad to navigate to the desired menu option and settings, press MENU to  
confirm a setting), with these available options:  
Option  
Settings  
Description  
Delete One  
OK, Cancel  
Deletes only the currently viewed photo or video. Highlight  
“OKand press the MENU button to delete the photo or video.  
Format  
Protect  
Cancel, OK  
Select OK and press MENU to format (clear) an SD card for use  
in the camera. Erases all previously stored files on the card. Will  
also erase internal memory contents.  
Lock, Unlock  
Prevents accidental erasure. If “Lockis activated, that file  
cannot be deleted using the “Delete Onefunction. Highlight  
“Lockand press MENU to protect the currently viewed photo  
or video. Note: Formatting internal or card memory will erase  
even protected files.  
Language,  
Auto Off, Clock  
Set, etc.  
various  
Same functions as described in “Main Menu-Options and  
Settings”-these are just duplicated in the Review menu for your  
convenience.  
Exit  
Exits the review menu and returns to the last image viewed.  
Press the View button to switch to the live Preview display  
again.  
14  
System Requirements  
OS: Windows® 2000/ME/XP/Vista/Windows 7 or Mac OS 9/OS X  
Internal USB Port  
Downloading the Photos & Videos to Your PC  
1.  
Turn on the Imageview’s power. Connect the supplied cable to the ImageView’s USB port, then directly  
to a main USB port on your computer-do not use front panel/keyboard USB ports or unpowered “hubs.  
The LCD display will indicate “Mass Storage”, and the ImageView will be recognized as a standard “USB  
Mass Storage” device. This means that the camera files can be easily viewed, edited, or copied to your  
hard drive, just as if they were stored on an external hard drive or a CD-ROM.  
2.  
3.  
Open“My Computer”orWindows Explorer on your PC (if your PC is running Windows XP or a later operating  
system, you may simply use the options in the pop-up window to view, copy or edit your photos). The camera  
is the device identified asBUSHNELLwith an unused drive letter assigned to it (on Mac computers, it will  
appear on your desktop). Double click this “Bushnell” storage device, open the “DCIM” folder inside, then  
the folder(s) inside that (“100MEDIA” ,etc). Your photos/videos are the files inside-they have the prefix  
“HUNT__followed by a 4-digit number. To view the photos, change to a Filmstrip or Thumbnail file view,  
or double click a file name to open it with your default PC program.  
4.  
5.  
From the “My Computer” menu bar, select “Edit>Select All, or click on one photo file (Contol+click to  
select multiple photos), then selectEdit>Copy to Folder. Choose an existing folder on your hard drive,  
such as “My Pictures, or create a new folder (“Hawaiian Vacation, etc), then click “OK” to transfer copies  
of any or all of the photo files you want from the camera to your hard drive.  
After the photos are transferred to your hard drive, you can disconnect the camera. Some older Windows  
OS computers may produce a screen warning that you have disconnected a USB device without stopping  
or ejecting the “disk” first (your photo files will not be harmed). If so, check the box that adds an icon to  
your system tray or taskbar. Then next time you finish transferring photos, you can click that icon first,  
and “Stop the USB Mass Storage Devicebefore disconnecting the camera*.  
15  
Downloading the Photos & Videos to Your PC  
6.  
You’re now ready to open the photo files in any photo editing software. Just go to the folder where you  
stored the photos earlier and select File>Open. It is also possible to open and work with your photos  
directly from the ImageView while it is still connected. If you choose to work this way, from a connected  
camera, be sure that you save the photo (when finished editing) to your hard drive, and not the camera’s  
memory or card.  
7.  
If you are new to photo editing on a computer, consult your software’s Help menu for tips on using its  
features. Along with adjusting the brightness, contrast, sharpness and color of your photos, you can  
resize the photo to fit the paper if you are printing, or save a smaller, low or medium resolution version  
for email or inserting into documents. When you are ready to save your edited file, you will likely want to  
useSave Asand give it a more descriptive name thanHUNT___. Doing this also preserves the original  
file as a backup if you decide to make different edits later. Make sure you have successfully transferred  
all the photos you wanted to save before using “Delete One” or “Format” in the Review menu to delete  
your old files to make room for new images.  
* On Mac computers, you should “eject” the “disk” that appeared on your desktop when the camera was  
connected.  
Note: If your PC will not play the .avi movie files in Windows Media Player, you may need to download a newer  
version of Media Player or Direct X from Microsoft.com. The movie files can also be played back with the  
QuickTime Player, included with many computers, or available as a free download from Apple.com.  
16  
Technical Specifications  
Magnification  
Objective Diameter  
Exit Pupil  
8x  
Sensor Type  
CMOS  
30mm  
Sensor Resolution  
3.2 Megapixels  
3.75mm  
Effective Resolution  
Settings  
8MP*, 5MP*, 3MP (default setting), 2MP, 0.5MP  
(*via software interpolation)  
Field of View 320 ft @ 1000 yds  
Internal Memory  
16MB Flash Memory (NAND)  
SD / SDHC card (optional) , up to 32 GB capacity  
JPEG/AVI  
Eye Relief  
13mm  
Memory Expansion  
Lens Coating  
Fully Coated  
File Format (Still/  
Video)  
Prism Type  
Roof, BK-7 glass  
File Management  
LCD  
DCF (version 1.0), FAT 16 Format  
1.5” TFT  
Focusing Range  
(binocular)  
14~ infinity  
Weight  
14.9 oz / 422 g  
Video Resolution/  
Frame Rate  
640x480 or 320x240 pixels per frame  
@ 15 or 30 fps.  
Shutter  
Electronic,  
1/16 to 1/1000  
seconds  
Exposure Value Range  
+/- 2 EV in 0.5 EV steps  
Focusing Range  
(camera)  
Fixed, approx 30’ White Balance Options  
Auto, Daylight, Cloudy, Fluorescent, Tungsten  
~ infinity  
Lens Aperture  
Power Supply  
f/5.6  
Menu Languages  
English, French, Spanish, Italian, German  
1 or 2 minutes or Disabled  
2xAAA Batteries,  
Alkaline/Lithium/  
NiMh type  
Auto Power Off (after  
inactivity)  
17  
FCC Note:  
TWO-YeAR LIMITeD WARRANTY  
Your Bushnell product is warranted to be free of defects in materials and workmanship for two years  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However,  
there is no guarantee that interference will not occur  
®
after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair  
or replace the product, provided that you return the product postage prepaid. This warranty does  
not cover damages caused by misuse, improper handling, installation, or maintenance provided by  
someone other than a Bushnell Authorized Service Department.  
Any return made under this warranty must be accompanied by the items listed below:  
1) A check/money order in the amount of $10.00 to cover the cost of postage and handling  
2) Name and address for product return  
3) An explanation of the defect  
4) Proof of Date Purchased  
5) Product should be well packed in a sturdy outside shipping carton, to prevent  
damage in transit, with return postage prepaid to the address listed below:  
in  
a
particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the  
following measures:  
IN U.S.A. Send To:  
Bushnell Outdoor Products  
Attn.: Repairs  
IN CANADA Send To:  
· Reorient or relocate the receiving antenna.  
Bushnell Outdoor Products  
Attn.: Repairs  
·
Increase the separation between the equipment and  
receiver  
.
9200 Cody  
25A East Pearce Street, Unit 1  
Richmond Hill, Ontario L4B 2M9  
· Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
· Consult the dealer or an experienced radio/TV  
technician for help.  
Overland Park, Kansas 66214  
For products purchased outside the United States or Canada please contact your local dealer for  
applicable warranty information. In Europe you may also contact Bushnell at:  
Bushnell Germany GmbH  
European Service Centre  
Mathias-Brüggen-Str. 80  
D-50827 Köln  
GERMANY  
Tel: +49 221 995568-0  
Fax: +49 221 995568-20  
The shielded interface cable must be used with the  
equipment in order to comply with the limits for  
a digital device pursuant to Subpart B of Part 15 of  
FCC Rules.  
This warranty gives you specific legal rights.  
You may have other rights which vary from country to country.  
Specifications and designs are subject to change without  
any notice or obligation on the part of the manufacturer.  
©2010 Bushnell Outdoor Products  
For further questions or additional information please contact:  
Bushnell Outdoor Products  
9200 Cody, Overland Park, Kansas 66214  
(800) 423-3537 • www.bushnell.com  
©2010 Bushnell Outdoor Products  

Alpine CDA 9811R User Manual
Audiovox Rampage ACC 60 User Manual
Blaupunkt BERGAMO RCR 148 User Manual
Canon 2 8 User Manual
Canon PICTBRIDGE DC22 User Manual
Cuisinart DLC XP User Manual
Fender LOUDSPEAKER SYSTEMS XP 110 User Manual
Gitzo Classic Tele Studex Mk2 G1504 User Manual
Jensen MPX6411 User Manual
JVC GET0199 005A User Manual