User’s Guide
Model 3554
Lift-Off™ Upright Vacuum
& Detachable Canister
■
Assembly
■
Operation
■
Maintenance
Troubleshooting
■
Thanks for buying a BISSELL Lift-Off™Upright Vacuum.
We’re glad you purchased a BISSELL Lift-Off Upright
Vacuum & Detachable Canister. Everything we know about floor
care went into the design and construction of this powerful,
innovative home vacuuming system.
Your BISSELL Lift-Off is well made, and we back it with a
comprehensive one-year warranty. We also stand behind
it with a knowledgeable, dedicated Consumer Service
department, so, should you ever have a problem, you’ll
receive fast, considerate assistance.
My great-grandfather invented the floor sweeper
in 1876. Today, BISSELL is a global leader in the
design, manufacture, and service of high quality
homecare products like your BISSELL Lift-Off.
Thanks again, from all of
us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
■
Detachable canister
Filtrete Vacuum Filter
™
■
System from 3M
■
Wide 14” cleaning path
■
■
Self-adjusts to all floor surfaces
5 specialized tools for all
vacuuming needs
WARNING:
Do
not plug in your vacuum
cleaner until you have
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures.
Dusting
Brush
Soft-Grip Handle
Upholstery
Nozzle
Crevice
Tool
Quick-Release
Cord Wrap
Wands
Upper Cord Wrap
Lift-Off Release Latch
35’ Power Cord
5’ Clear
Self-Retracting
Vacuum Hose
Lower Cord Wrap
On/Off Switch
Canister Door
Panel
Latch
Handle Release Pedal
Canister
(Detachable)
Filtrete™ Filtration
Exhaust Filter
from 3M
Lift-Off Latch
Wide Beam Headlamp
2.
werfoot/
Chassis Unit
Furniture Protection Guard
3
How to use this guide
Pay particular attention to the assembly diagram,
This User’s Guide has been designed to help you get
the most satisfaction from your BISSELL Lift-Off
Upright Vacuum & Detachable Canister. You’ll find
assembly and operating instructions, safety precautions,
as well as maintenance and troubleshooting
instructions. Please read this Guide thoroughly
before assembling your vacuum cleaner.
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with the parts and where they go. Following
this User’s Guide will greatly enhance your ability
to get the most performance from your BISSELL
Lift-Off for many years.
How to put it together
WARNING:
No tools are required to assemble your
BISSELL Lift-Off.
Plastic bags or plastic
film can be dangerous.
To avoid danger of
suffocation, keep away
from babies and children.
Attach Vacuum Body to Powerfoot
Remove protective plastic film from Powerfoot and Handle
and dispose.
1.
2.
3.
Place Powerfoot on floor with rotating floor brush on
floor surface.
Place Handle on Chassis as shown and push down firmly. You
will hear a ‘click’ when the three tabs on the Handle lock into
matching openings on the Chassis.
Assembly is now complete.
4
Index
Safety instructions . . . . . . . . . .2
Product view . . . . . . . . . . . . . .3
How to put it together . . . . . . .4
Special tools . . . . . . . . . . . . . . .5
Index . . . . . . . . . . . . . . . . . . . .5
Special tools for every job
How to use your
BISSELL Lift-Off . . . . . . . . . . . .6
Dusting Brush
Crevice Tool
Cleaning carpet, rugs
or bare floors . . . . . . . . . . . . . .7
Upholstery Nozzle
Routine maintenance . . . .8-11
Troubleshooting . . . . . . . . . . .12
Replacement parts . . . . . . . . .13
Warranty . . . . . . . . . . . . . . . .14
Consumer Service . . . . . . . . .14
Wands
Your BISSELL Lift-Off is not only a powerful carpet and
rug vacuum cleaner, it’s also a versatile above floor vacuum
cleaner when you select one of the five special tools included.
Tools may be used with the Detachable Canister on or off the
Powerfoot/Chassis.
■ Dusting Brush - For dusting surfaces such as table tops,
mantles, lamp shades, drapes, woodwork, etc.
■ Wands - For extra length or reach.
■ Crevice Tool - For tight, narrow spaces.
■ Upholstery Nozzle - For small area vacuuming such as
upholstered household furniture, automobile interiors,
drapery, etc.
Tip:
Hair, string and
small objects
can block the
Vacuum Hose
or Tools.
Check them
occasionally for
obstructions. See
Troubleshooting
Guide for
instructions.
5
How to use your BISSELL Lift-Off
Power Cord Quick Release
The Power Cord is stored at the side of the Detachable Canister,
wrapped around two Cord Wraps. A molded clip on the
polarized plug allows it to be fastened to the Power Cord
during storage.
1. Unclip polarized plug from Power Cord.
2 Rotate the Upper Cord Hook one-half turn right or left, and
slip Power Cord from Upper and Lower Cord Wraps.
3. Plug in the Power Cord Plug into a polarized outlet.
4. To keep the Power Cord out of your way while cleaning,
place it in the Cord Hook, located near the top of the Handle.
Power Switch
The Power Switch is located just below the carry handle on the
Detachable Canister. Push the rocker switch “ON” to vacuum,
and “OFF” when cleaning is complete.
NOTE: This unit is equipped with a special internal switch that turns the
rotating brush off whenever the unit is inthe upright position.
Quick
Release
Cord
Wrap
Power
Switch
6
Cleaning carpet, rugs or bare floors
Handle Release Pedal
CAUTION:
Always
place vacuum cleaner on
floor in its fully upright
position, and make sure it is
locked into place before
removing Canister or when
using tools. Placing the
Lift-Off in its full upright
position automatically stops
the rotating brush, and the
headlight will turn off.
Press the Handle Release Pedal with your foot to change
your Lift-Off from full upright/above floor cleaning
position to normal carpet cleaning position, or for low
cleaning under beds and low furniture. Always store or
transport in the full upright position, rolling the cleaner
on rear wheels only.
Cleaning with the Detachable Canister
The Detachable Canister feature makes it possible to take
the powerful cleaning action of your BISSELL Lift-Off to
stairways, auto interiors, or other hard-to-reach areas of
your home.
Before detaching the Canister, your
Lift-Off must be in its fully upright
position. You do not need to turn off
the power first.
Tip:
Before cleaning
under low furni-
ture, check for
objects that
might harm the
rotating floor
brush or block
the vacuum
hose. Do not
pick up hard or
sharp objects
such as glass,
nails, screws,
coins, paper
clips, etc.
1. Press the Lift-Off Release Latch at
the back of the Chassis and lift
the Canister to remove.
2. Detach the Vacuum Hose from
the port at the back of the
PowerFoot.
3. Press fit the desired tool to
the end of the Vacuum Hose.
4. When you’re done, return
the Canister to the
Powerfoot/Chassis by sliding
it straight down the Chassis
over the power port and
Powercord Storage
remove the tool used.
When you are done cleaning, return your
Lift-Off to the Upright position and store the
Power Cord.
The Lift-Off Latch will lock
the Canister in place.
Reconnect the Hose to
the vacuum port.
1. Turn vacuum cleaner OFF.
2. Unplug Power Cord by grasping the
polarized plug (NOT the cord) and dis-
connect from outlet.
3. Loop Power Cord around Cord Wraps on
the side
of Canister.
4. Clip molded plug to Power Cord to secure.
7
Routine maintenance
To maintain maximum performance from your BISSELL
cleaner, perform these simple maintenance checks periodically.
For average household use, follow this maintenance schedule:
WARNING:
To
Every Week:
Check the Filtrete Vacuum Filter Bag (page 8)
and Filtrete Exhaust Filter (page 10)
reduce the risk of injury
from moving parts, and/or
electrical shock, turn Power
Switch OFF and disconnect
polarized plug from electrical
outlet before servicing.
Every Month:
Check the Drive Belt and Rotating Brush (page 9)
Every 6 Months: Replace the Filtrete Exhaust Filter (page 10)
Replace Vacuum Bag
To maintain peak vacuum efficiency, you should check the
Filtrete Vacuum Filter Bag weekly, and replace it when it is
no more than three-quarters full.
Never reuse a Vacuum Bag.
1. Remove front canister panel by pressing Panel Latch,
as shown. Pull panel forward to remove.
Panel
Latch
2. If bag is three-quarters full (or more), place your
fingers behind the collar and gently slide it from the
dirt tube. Discard the Vacuum Bag.
3. Press the Handle Release Pedal and lower cleaner to
fully reclined position (laying the handle on the floor).
4. Fold top of new bag forward and grasp both sides of the
cardboard collar with your hand. Put your fingers
through the hole in the collar to create an opening for
the dirt tube.
5. Match the bag with the tabs at the back of the Canister,
and angle to place the collar under the tabs.
6. Gently push the bag onto the dirt tube until the entire
Tip:
Vacuuming
new carpet or
fine powders
such as drywall
dust can rapidly
fill the Vacuum
Bag, so check it
more frequently.
collar touches the back of the Canister.
7. Position canister panel so bottom tabs fit into slots.
Push panel closed until it snaps into place.
Replacement Bags
Use only BISSELL Style 4 bag made with Filtrete™ technology
from 3M (#32031, package of 2) in your BISSELL Upright
Vacuum Cleaner.
You may purchase the Bag
at your local retailer,
with the order form in this User’s Guide,
or by calling
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. – 7 p.m. EST
Saturday
9 a.m. – 2 p.m. EST
or from the BISSELL website –
http://www.bissell.com
8
Check Rotating Floor Brush and Drive Belt
Check the Drive Belt and Rotating Floor Brush regularly for
wear or damage. You should also remove string, hair, and
carpet fibers from the Brush and Brush ends. These can wrap
around the brush and hamper its ability to effectively clean
your carpet.
1. Unplug the unit, then press Handle Release Pedal to
position cleaner in full recline position.
2. Turn entire cleaner over to expose bottom of Powerfoot.
3. Using a Phillips head
screwdriver, loosen the two
screws that secure the Brush Cover.
4. Remove the Brush Cover and check the Belt for damage or
wear, and the Brush for debris.
5. Check Belt carefully for wear, cuts or stressed areas. Inspect
entire Belt by rolling Floor Brush with the palm of your
hand several times in the direction of the motor pulley.
6. Check Air Passageway for obstructions. Remove debris from
this area.
Replace Drive Belt
1. Grasp the Brush at both ends and lift up.
2. Slide old Belt to clear motor pulley, remove Belt,
and discard.
3. Loop new Belt over motor shaft and stretch other end over
crown of Floor Brush.
4. Place Belt end of Brush into its slot and hold it in place with
your hand, while slowly pulling opposite end of Brush down
into its slot with your right hand.
5. Turn Brush by hand several times in direction of pulley. If
properly installed, the Belt will center itself on brush crown.
6. Replace Brush Cover. Be sure to align and insert front edge
of Brush Cover and secure with screws.
Replacement Belts
Use only BISSELL Replacement Belt (#32035, package of 2) in
your BISSELL Upright Vacuum Cleaner. You may purchase
these Belts:
at your local retailer.
with the order form in this User’s Guide.
or by calling
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. – 7 p.m. EST
Saturday
9 a.m. – 2 p.m. EST
or from the BISSELL website –
http://www.bissell.com
9
Check/Replace Filtrete™ Exhaust Filter
To keep your Lift-Off operating at peak efficiency and to
remove irritating allergens from your home, you should
change the Filtrete Exhaust Filter from 3M every six months.
The self-contained filter easily pulls outward from the top,
and the new one snaps into place.
Replacement Filter
Use only BISSELL Style 4 Filtrete Exhaust Filter (#32032,
package of 1) in your BISSELL Upright Vacuum Cleaner.
You may purchase the filter:
at your local retailer,
with the order form in this User’s Guide,
or by calling
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. – 7 p.m. EST
Saturday
9 a.m. – 2 p.m. EST
or from the BISSELL website –
http://www.bissell.com
Filtrete™
Exhaust
Filter
10
Replace Lightbulb
You may need to replace the Lightbulb in your Lift-Off.
Remember, the light isn’t on unless the brush is rotating.
It is off when the cleaner is upright, and/or when the
Canister is removed for use with cleaning tools.
1. Remove the clear plastic lens at the front of the
Powerfoot by gently inserting a small, flat-blade
screwdriver into the notch at the bottom of the lens.
2. Remove the old bulb by pulling it straight out of socket-
do not twist. Gently push replacement bulb into socket.
3. Reposition lens over opening and snap into place.
Replacement Bulbs
Use only BISSELL Replacement Bulbs (#0101178) in
your cleaner. You may purchase these Bulbs
with the order form in this User’s Guide.
or by calling
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. – 7 p.m. EST
Saturday
9 a.m. – 2 p.m. EST
or from the BISSELL website –
http://www.bissell.com
11
Troubleshooting
WARNING:
To reduce the
risk of injury from moving parts
and/ or electrical shock, turn
Power Switch OFF and disconnect
polarized plug from electrical
outlet be for e p e r for mi ng
troubleshooting checks.
Vacuum cleaner won’t run
Possible Causes
Remedies
Vacuum cleaner is not plugged in Check electrical plug
Household fuse/breaker
Check/replace fuse - Reset breaker
button. Call BISSELL Consumer Services
Vacuum cleaner won’t pick up dirt
Possible Causes
Remedies
Replace with new bag
Vacuum Bag is full
Vacuum Hose is clogged
at Powerfoot
Remove canister. Recline cleaner.
Check Hose/hose port for debris
and remove if necessary
Rotating Brush Drive Belt broken Replace Drive Belt
Drive Belt stretched/
off Motor Pulley Shaft
Reposition Belt/clean Brush/Belt areas
or replace worn Belt
Rotating Floor Brush bristles worn Replace Brush
Rotating Floor Brush jammed
Remove Brush and clean debris from
Brush ends
Height adjustment too high
Reset Floor Surface Selector setting
Tools won’t pick up dirt
Possible Causes
Remedies
Vacuum Hose, Wands
or Tools clogged
Visually check for objects blocking
suction path and remove carefully
No power at rotating floor brush
Possible Causes
Remedies
Press Lift-Off Latch, remove canister
and replace it properly
Canister is not securely seated
Rotating Brush Drive Belt Broken Replace Drive Belt
Drive Belt stretched/
Reposition Belt/clean Brush/Belt areas
off Motor Pulley Shaft
12
Replacement part numbers and descriptions
Item Part No. Part Descriptions
If suggested solutions for this or any function of your
Upright Vacuum Cleaner do not correct the problem, call
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. – 7 p.m. EST
1
2
3
32031
32032
32035
Filtrete™ Vacuum Bag from 3M
(package of 2)
Filtrete™ Exhaust Filter from 3M
(package of 1)
Saturday
9 a.m. – 2 p.m. EST
Drive Belt
(package of 2)
Headlight Bulb
Wand
Crevice Tool
Upholstery Nozzle
Dust Brush
or from the BISSELL website –
http://www.bissell.com
4
5
6
7
8
0101178
0109664
0109157
0109179
0101162
1
2
3
4
6
5
8
7
13
About your warranty
This warranty gives you specific legal rights, and you may also have other
rights which may vary from state to state. If you need additional instruction
regarding this warranty or have questions regarding what it may cover, call
BISSELL Consumer Services.
One Year Warranty
BISSELL Inc., upon receipt of the product, will repair or replace, free of charge,
any part which is defective or malfunctioning within one year of the purchase
date, provided that it is used for personal and not commercial or rental service.
If the vacuum cannot be repaired, BISSELL Inc. will replace or refund the full
price, at your option.
If your BISSELL product should require service:
1. Call BISSELL Consumer Services at 1-800-237-7691 and we will give
you the name and address of an authorized BISSELL Service Center in
your area. Or visit the BISSELL website - http://www.bissell.com
2. If there is not an authorized BISSELL Service Center in your
area, a BISSELL Consumer Services Representative will issue you
a Return Authorization Number and a pre-paid mailing label to
return the unit to BISSELL.
— The product should be returned with a photocopy of
your proof of purchase. (Your dated sales receipt is your
warranty - do not send original.)
— Insure the machine when shipping for your protection
from loss.
BISSELL Consumer Services
For information about repairs or replacement parts, or questions
about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 7 p.m. EST
Saturday
9 a.m. — 2 p.m. EST
Or write:
BISSELL INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
©1998 BISSELL Inc
Grand Rapids, Michigan
All rights reserved. Printed in USA
Part Number 010-5739
NOTE: Please keep your original sales receipt. It is your warranty.
It is suggested you staple your original sales receipt to the
front of this guide.
Visit our web site at:
http://www.bissell.com
14
|