Bushnell Marine Battery 78 6035 User Manual

Lit. #: 91-0142/03-01  
Harbormaster  
35 x 60  
Refractor  
Telescope  
Model 78-6035  
Thank you for purchasing the Bushnell Harbormaster Telescope! Your new telescope has been designed and crafted  
with the highest standards so that you may have years of enjoyment out of this wonderful window to the world. This  
instrument comes complete with a vintage solid brass telescope crafted and polished to perfection, a solid wood tripod with  
antique cherry finish, and a precision ground 60mm lens.  
We would like to take this time to illustrate some of the  
TELESCOPE ASSEMBLY  
inherent traits of brass. Brass has a tendency to have minor  
imperfections that should not be considered as defective.  
Rather, these should be considered just for what they are--  
common occurrences within the brass that add to the  
character and antiquity of this product.  
Remove all components from the carton and identify all  
components. READ THROUGH ASSEMBLY INSTRUCTION  
BEFORE YOU ASSEMBLE YOUR TELESCOPE.  
It is our hope that you will enjoy and appreciate this fine  
example of Old World craftsmanship and its authentic  
1. Set-Up Tripod, Mount and Accessory Tray  
• Locate the Altazimuth Yoke Mount (3). Note: B e f o r e  
assembling tripod legs to Altazimuth Yoke Mount,  
make sure the Accessory Tray Braces (7) face inward.  
Locate the long bolts and washers from the hardware  
pack. Position the mount over the Tripod Leg (5) as  
shown (fig. 1) and align the holes in the Tripod Leg with  
the holes in the mount. Insert the bolts through the holes  
at the top of a Tripod Leg. A washer should be positioned  
on both outer sides of the Tripod Leg. Attach a wing nut  
to the bolt, but do not tighten it all the way. Repeat on the  
remaining two Tripod Legs. Once you have attached all  
Tripod Legs to the mount, securely tighten all wing nuts.  
design for years to come.  
STANDARD EQUIPMENT  
• Solid Brass Telescope  
• Solid Wood Tripod  
• Altazimuth Yoke Mount  
• Accessory Tray  
• Hardware Pack:  
Tripod leg: 3-2 1/2"bolts, 6-11/16 washers and 3-  
wingnuts  
Accessory tray: 3-1/2" bolts, 6-11/16" washers and 3-  
wingnuts  
Tripod Leg Lock Screws: 3 pc.  
• Locate the Accessory Tray (8). Using the accessory tray  
bolts, wingnuts and washers ( 3-2 1/2" bolts, 6-11/16  
washers and 3 - wingnuts) connect the Accessory Tray  
to the Accessory Tray Braces (7). Start with one Tripod  
Continued on page 2  
 

Billion Electric Company Network Router 8501 User Manual
Black Decker Saw CS1030L User Manual
Brother All in One Printer 2820 User Manual
Brother Sewing Machine NS 50 User Manual
Canon Camcorder Accessories HF M300 User Manual
Canon Scanner DR 2080C User Manual
Casio Musical Instrument LK35 User Manual
Casio Watch GQ 200 User Manual
Celestron Telescope 5 SE User Manual
Chicago Electric Drill 96996 User Manual