Havis Shields 1995 2007 Ford Crown Victoria Trak Mount Kit C TM CV User Manual

INSTALL INSTRUCTIONS C-TM-CV

1995-2007 FORD CROWN VICTORIA TRAK-MOUNT KIT

TOOLS REQUIRED:

Ratcheting Wrench

Standard Socket Set

Tape Measure

Metric Socket Set

HARDWARE:

QTY DESCRIPTION

PART#

¼” x ¾” Hex head bolt

¼” Serrated nut

¼” Flat washer

GSM33001

GSM30023

GSM31005

GSM31026

¼” Split lock washer

SUB ASSEMBLY:

1. MOUNT TRAK TO HUMP BRACKETS.

• Determine location that Trak will land on transmission hump for the specific

application.

• With Trak in necessary location, measure Front and Rear Hump Bracket in relation to

Trak.

• Bolt trak to the front hump bracket, top plate using measurements taken in previous

step. Use (4) ¼-20 x ¾” Hex head bolts and serrated nuts.

Note: There are 2 different sides to the Trak Plate. It is recommended to mount Hump brackets to

side of Trak Plate that has ¼” hardware slots closer together, to better accept equipment, (consoles,

control heads, etc)

TRAK-MOUNT ASSEMBLY

Trak Mount

¼” Hardware

Slots

Front Hump

Bracket (C-B33)

Rear Hump

Brackets (C-B16)